ChinaRiders Forums - View Single Post - Zongshen 200GY-A, rehab exhaust question

tankme · 07-21-2014, 11:19 PM

Oh like a little access hatch. Roger that. Am all I'm expecting to see is honeycomb? Seems easy enough. Then the midpipe is the next part to start fabricating. I'll post pics of the task unfolding if I can remember.

I still haven't hangered it yet though, I've been un-taping all the hand taped parts of the harness looking for breaks or my chopped starter wire.

And I think I have discovered this bike was probably jumped off of something and the frame was broken and re-welded. I uncovered some welding wires poking out of a weld down in one of the frame joints and some welds on top of welds on the opposing joint. If I find cracks I'll need to attempt to patch them before I get all put back together. That's another topic again once I get that area of the bike clean enough to tell. Plus the swing arm makes contact with one of the passenger peg frames (which I'll prolly cut off anyway.)

Well there it is, I will gut/weld the cc and then ask questions about a mid-pipe and a PM about a muffler.

I'll be back!
Jim

07-21-2014, 11:19 PM	#22
tankme Join Date: Jul 2014 Location: Texas Hill Country Posts: 144	Oh like a little access hatch. Roger that. Am all I'm expecting to see is honeycomb? Seems easy enough. Then the midpipe is the next part to start fabricating. I'll post pics of the task unfolding if I can remember. I still haven't hangered it yet though, I've been un-taping all the hand taped parts of the harness looking for breaks or my chopped starter wire. And I think I have discovered this bike was probably jumped off of something and the frame was broken and re-welded. I uncovered some welding wires poking out of a weld down in one of the frame joints and some welds on top of welds on the opposing joint. If I find cracks I'll need to attempt to patch them before I get all put back together. That's another topic again once I get that area of the bike clean enough to tell. Plus the swing arm makes contact with one of the passenger peg frames (which I'll prolly cut off anyway.) Well there it is, I will gut/weld the cc and then ask questions about a mid-pipe and a PM about a muffler. I'll be back! Jim __________________ 2008 Zongshen 200GY-A, HS163FML : Needs: Battery, Battery Box, Both clutch and brake handles, exhaust system, all plastics, gas cap, starter rewired. Her name will be Phoenix. 2007 Shineray Speedee 150, 1P57QMJ: Needs: starter rewired, exhaust connected, cleaned up, ignition switch simplified, new seat and lights, new front and back racks. There's no such thing as a free puppy or motorcycle. I think I have caught the fever from y'all.
	0