[mmprestine]

Well I got a bug up my arse about fixing the side stand before I went riding today. I emulated the Japanese method. It seems odd to me that TMEC wouldnt just do it the correct way to start with. I took the cut off wheel and clipped the welds then pulled the upper pin out of the hole. I used a bolt that came from the crate packing and put it in the back side of the hole and welded it from the front and back. I then removed the lower pin off the front and put it in the same location but on the back of the side stand. After the modification I only needed the single larger spring. There will be a couple posts to show the before and after.

Here it is.