[01SSRedA4]

Here's what you'll find under that black cover. I believe this is a 17mm. An impact gun zipped it out.



Notice the long bolt has an O'ring seal on it. Inspect it and replace it if necessary. Mine looked fine.



Next is the crap on the bottom of the cover. The two electrical connectors simply pull straight off, and the cable and brackets will need to be unbolted. The bolt holding the black bracket is a dual use bolt, meaning it holds the bracket but is a critical fastener for the cover as well. The one holding the silver cable bracket is not.



Here's what's under the kickstart cover. This is how your ATV makes its own electricity. Basically, an alternator.



The backside of the cover itself:



--------------------