Quote:
Originally Posted by Belamoto
Does this look right to you? I suspect not. I'm sure the CSC guys would have sorted out any issues like this before shipping theirs but this RX3 came straight from the Zongshen factory.
|
It turns out that these days in the UK if I new bike isn't fitted with a kill switch on the side stand then the side stand has to be self retracting. Maybe it's the same for you in NZ.
Spud has provided the link to my post of how I solved the problem,
but before you dig out the angle grinder to cut the bolt, try just turning the bolt around and the kidney shape metal tab that the springs are attached to.
This should do the trick
I cut my side stand bolt in a fit of anger
straight after I dropped my bike
because of the pesky side stand retracting