Quote:
Originally Posted by katflap
I've been having a bit of a poke around these spare connectors and matching them up to the circuit diagram.
On my RX3 there's one under the tank and 2 under the pillion seat area.
My best guess is
under the tank
----------------
Red 2 pin connector - to a solenoid valve to shut off the fuel supply.
under the pillion seat
-----------------------
White 3 pin connector - "tip over" switch to operate the shut off valve for
when you ditch your bike.
For some reason they decided not to bother.
White 2 pin connector - No idea, but I know some bikes will have a connector like this for connecting a switch to turn on the MIL light so it will flash diagnostic codes.
yeah ,you know I was tempted to short the pins but I didn't want to risk frying the ECU
Or maybe a side stand kill switch as the Delphi MT05 has it listed
|
As always, thanks for sharing your research, Kat.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894