View Single Post
Old 05-07-2015, 08:27 AM   #3370
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Quote:
Originally Posted by Miqueas View Post
... Aroung 10 minutes to my house, I felt like something hit my left leg, I asumed it was some garbage from the street. But now thinking could be that cable being loose in that moment. Maybe (?).

The cable originally was inside hanging vertically, but I put it outside so you can see it better.
Quote:
Originally Posted by pete View Post
it looks to be a breather hose..tuck it in behind the motor... not a issue..

But there is another issue I noticed in the pic....
the clutch cable retaining tag on the motors clutch
arm has never been bent down to stop the clutch cable
droping out of the arm.....
Bend it down.... it's the tag sticking out beside the word "UP"
on the cable seat....
Pete is correct on both points. You can route the breather hose straight down just about any place where it will not be pinched. However, if you look at the frame near the back, left side of the engine, you will see a metal circle. You can route the breather hose through that circle, and it will be protected.

The tab on my clutch lever was also left unbent at the factory.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote