You are wise to change the fork oil quickly; you will not be sorry you did so.
I think it will difficult to put spacers at the top of the fork, since tightening and loosening the nut on the damping rod is the hardest part of the job, especially if you don't have a very thin, 14mm wrench. You
might be able to put a spacer at the bottom of the spring, but you might not, depending on the ability of the cartridge to support the spacer.
When you have the forks apart, please do take a good look and evaluate this option for us.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894