Quote:
Originally Posted by woodlandsprite
Hey, for those who have added Handguards, what are you finding for inner diameter of the handlebars? I remember spud mentioning 12mm. I'm trying to decide if I'm taking advantage of the revzilla sale on Barkbusters. I know hand guards can be had for less, but those seem to go on with the least fuss. They have a 12mm bar end insert- it seems the standard inserts are just a hair too big to fit.
|
I didn't use my digital calipers to measure the hole in the handlebar ends. I used my plastic calipers from Harbor Freight, so my measurement was not precise.
![Wink](images/smilies/windfk.gif)
However, if you need to enlarge the hole slightly, it shouldn't be too hard to ream the aluminum with a slightly larger drill bit.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
![Wink](images/smilies/windfk.gif)
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894