ChinaRiders Forums - View Single Post

SpudRider · 10-16-2015, 11:10 PM

Rather than seal the film to the outside of the speedometer, perhaps you should remove the cover, and place the film on top of the display inside the speedometer.

This will keep the film in place without the need for any adhesives.

http://www.chinariders.net/showpost....postcount=4302

The indicator lights on the right of the dashboard are covered with a film which contains silhouettes for the turn signal arrows, et cetera. If you remove that piece of film, the indicator lights will be much brighter.

You will lose the symbols, but we know the colors for each symbol, so the symbols aren't really necessary.

Top Green: Turn Signals
Blue: High Beam Indicator
Yellow: Low Fuel Warning
Bottom Green: Neutral
Red: Engine Warning Light, DTC Indicator

10-16-2015, 11:10 PM	#9
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Rather than seal the film to the outside of the speedometer, perhaps you should remove the cover, and place the film on top of the display inside the speedometer. This will keep the film in place without the need for any adhesives. http://www.chinariders.net/showpost....postcount=4302 The indicator lights on the right of the dashboard are covered with a film which contains silhouettes for the turn signal arrows, et cetera. If you remove that piece of film, the indicator lights will be much brighter. You will lose the symbols, but we know the colors for each symbol, so the symbols aren't really necessary. Top Green: Turn Signals Blue: High Beam Indicator Yellow: Low Fuel Warning Bottom Green: Neutral Red: Engine Warning Light, DTC Indicator __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0