[SpudRider]

Thanks to Huck369 for informing us of the excellent, Tractor Supply Traveller, 15W work lights. Huck's installation is posted at the following thread.

http://chinariders.net/showthread.php?t=15356

Here is a link to the LED work lights I installed.

http://www.tractorsupply.com/tsc/pro..._id=1419610700

I modified the stock work lights so I could mount them to the engine guards with 3/4", split-ring pipe hangers, which I bought at Lowes.

http://www.lowes.com/pd_302049-34146...d=3223525&pl=1

I removed the vertical mounting bolts from the work lights, and enlarged the holes to accept 3/8" bolts to accommodate the pipe hangers. I mounted each work light to a pipe hanger with a 1" long, 3/8" bolt, two 5/16" washers, a 3/8" locking washer, and a 3/8" nut, as shown below.





I adjusted the work lights for vertical and horizontal alignment, and tightened all the hardware. After wrapping 8 turns of electrical tape to the engine guard, I mounted one of the work lights to the right side of the bike. I then test rode the installation for several hundred miles while I awaited the arrival of some two-wire plugs.