After checking the polarity of the auxiliary wiring harness, I fabricated a cable to connect the A1 auxilary plug to the work lights. I soldered a male connector on one end, and split the wires into two female connectors on the other end.
I soldered a male connector on the end of the wire from each work light.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894