ChinaRiders Forums - View Single Post - RX3 Aftermarket: Front Brake Calipers, Rotors, and Brake Pads

SpudRider · 11-10-2015, 09:18 PM

Fixing the pulsing, front brake rotor might be as simple as performing the following steps.

1) Remove the front brake rotor.
2) Re-install the front brake rotor, tightening the bolts incrementally, in a star pattern, to prevent warping the rotor.
3) De-glaze the front brake rotor, as shown in the video above.
4) Install EBC FA185R, sintered brake pads.

If the Honda caliper spring fits, I think it's best to install the Honda spring, rather than install the brake pads without a spring.

11-10-2015, 09:18 PM	#32
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Fixing the pulsing, front brake rotor might be as simple as performing the following steps. 1) Remove the front brake rotor. 2) Re-install the front brake rotor, tightening the bolts incrementally, in a star pattern, to prevent warping the rotor. 3) De-glaze the front brake rotor, as shown in the video above. 4) Install EBC FA185R, sintered brake pads. If the Honda caliper spring fits, I think it's best to install the Honda spring, rather than install the brake pads without a spring. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0