This thread contains a list of parts from other motorcycles which have been confirmed to fit the Zongshen RX3. This is a
closed list. Please contribute your discovery of any parts which fit the Zongshen RX3 in the following thread.
http://www.chinariders.net/showthread.php?t=15528
Brake Pads
Front Brake Pads: EBC FA185
If you click the following link, you will download the EBC catalog.
http://ebcbrakes.com/Assets/ecatalog...Cat.html#p=282
On page 282 you will find the FA185 brake pads. This page lists all the different motorcycles which employ these brake pads. Buy sintered, front brake pads for
any of these motorcycles, and they will fit the front brake caliper of your Zongshen RX3.
Rear Brake Pads: EBC FA140, EBC FA496
The RX3 motorcycles imported to the United States by CSC have the latest, rear brake caliper. The U.S. bikes use the EBC FA140, EBC FA496 brake pads employed by the following Japanese motorcycles.
Honda CB500X, NC700X
Triumph Tiger 800
Honda CBR250R, CBR300R, CB300F, CBR650F
Suzuki GW250, SFV650
Clutch Parts
Here is a list of the Honda motorcycles which employ the same clutch fiber plates, and clutch springs as the Zongshen RX3.
Honda XR650L
Honda XR600R
Honda NX650
Honda CR500R
Honda CR480R
Honda CR250R
It is reported the Honda, clutch metal plates are too thick.
Shift Lever
The Honda XR650L shift lever is
slightly longer than the RX3 shift lever. However, this Honda shift lever, and the many aftermarket shift levers for the Honda XR650L, have a folding tip.
The folding tip prevents damage to the shift lever and the engine, should you drop the motorcycle on its left side.
Rear Sprocket
The JTR473 sprocket is identical to the Zongshen RX3 sprocket for bikes with the rear cushion drive.
http://www.jtsprockets.com/catalogue/sprocket/JTR473-40
This sprocket is available with 40T, and 37T.