ChinaRiders Forums - View Single Post - Working With Diagnostic Data Cable & Software

katflap · 05-05-2016, 03:49 PM

Enjoy 4 mins of full-on 100% genuine RX3 data on your Windows 64bit computer. Using the new PCHUD simulator from katflap productions.

Ok, settle down, here we go

This is the first stage of trying to get pchud to run on windows 64bit.
It Is fully functional pchud, but i still need to get the pesky com ports to work so it can't, as yet recieve a live data feed from your bike. But i'm working on it !

The download contains 2 installers
1/ dosbox ( this is free software from the internet)
2/ PCHUD64 ( This is my stuff)

Both come with uninstallers

Disclaimer - I'm not an expert so use at your own risk !!
http://www85.zippyshare.com/v/1KGRWK06/file.html

instructions, in this order -

Install dosbox,
Install pchud64
now you can launch dosbox from the shortcut it has created on your desktop.
after a short time you will see pchud on your screen.
-------------------------------------------------------

To play back data in pchud -

select the playback tab,
select open playback,
select k_flap.ply, then press ok button,
press the forward button in the main pchud screen and it will begin to play,
put your feet up and geek away!

---------------------------------------------------------------

shutting down pchud --

select the file tab,
select exit.
after a short while you will see a blank screen with " c:\> "
type " exit " but without the quotes and it will exit and return you to your desk top screen.

If you run in to problems, which i don't think you will, you can yank the plug from the wall socket

or use these key commands
CTRL-F9 will quit dosbox
CTRL-F10 will restore mouse
ALT-ENTER or
ALT-RETURN will toggle fullscreen to a window screen

-------------------------------------------------------------------

a bit of info on the playback file i included ----

I was wanting to see how the fuel trims would react when presented with a rich mixture. so during this recording, about 3 or 4 times, i sprayed some butane gas in to the air box.
On one occasion it stalled the bike.
At about 3mins 25 i got it right and you can see the short term fuel trims (C L STFT COUNT, C L CORR FACT) go negative and dropping the pulse width to compensate for the rich mixture also the stepper motor opens the idle air control valve to let more air in.

Another note, it takes quite a long time before the "stable warm idle" to indicate at around 60-70 degs C

Last thing, pchud loads my latest par file, i will be posting notes on this soon ( you can select others)

05-05-2016, 03:49 PM	#106
katflap Join Date: Jan 2015 Location: England Posts: 382	Enjoy 4 mins of full-on 100% genuine RX3 data on your Windows 64bit computer. Using the new PCHUD simulator from katflap productions. Ok, settle down, here we go This is the first stage of trying to get pchud to run on windows 64bit. It Is fully functional pchud, but i still need to get the pesky com ports to work so it can't, as yet recieve a live data feed from your bike. But i'm working on it ! The download contains 2 installers 1/ dosbox ( this is free software from the internet) 2/ PCHUD64 ( This is my stuff) Both come with uninstallers Disclaimer - I'm not an expert so use at your own risk !! http://www85.zippyshare.com/v/1KGRWK06/file.html instructions, in this order - Install dosbox, Install pchud64 now you can launch dosbox from the shortcut it has created on your desktop. after a short time you will see pchud on your screen. ------------------------------------------------------- To play back data in pchud - select the playback tab, select open playback, select k_flap.ply, then press ok button, press the forward button in the main pchud screen and it will begin to play, put your feet up and geek away! --------------------------------------------------------------- shutting down pchud -- select the file tab, select exit. after a short while you will see a blank screen with " c:\> " type " exit " but without the quotes and it will exit and return you to your desk top screen. If you run in to problems, which i don't think you will, you can yank the plug from the wall socket or use these key commands CTRL-F9 will quit dosbox CTRL-F10 will restore mouse ALT-ENTER or ALT-RETURN will toggle fullscreen to a window screen ------------------------------------------------------------------- a bit of info on the playback file i included ---- I was wanting to see how the fuel trims would react when presented with a rich mixture. so during this recording, about 3 or 4 times, i sprayed some butane gas in to the air box. On one occasion it stalled the bike. At about 3mins 25 i got it right and you can see the short term fuel trims (C L STFT COUNT, C L CORR FACT) go negative and dropping the pulse width to compensate for the rich mixture also the stepper motor opens the idle air control valve to let more air in. Another note, it takes quite a long time before the "stable warm idle" to indicate at around 60-70 degs C Last thing, pchud loads my latest par file, i will be posting notes on this soon ( you can select others)
	1