Quote:
Originally Posted by zanoknight
...They rewired it all wrong and I have slowly put it back together.
|
Rewire is easier if divide in groups: E-start | IGN | Signal | Charging & lights (front/ rear)
http://www.chinariders.net/showpost....45&postcount=2
---
Honda color code is usable in chonda & other far east imports: Taiwanese (Kymco/ SYM & copycats...) | Korean (Daelim)
Red: battery's + to lock s/w
Pink: Stator to rec/reg
Blue: hi-beam
Green: - & ground
Black: the + after lock s/w
White: Charging output, Lo-beam
Yellow: Headlight's power source (AC headlight / half-wave system mostly) | charging input (rec)
Grey: flasher to indicating s/w
Orange: Indicating s/w to LEFT's
Sky blue:Indicating s/w to RIGHT's
light brown: lights in the Gauge
Brown/white: front position light
Light green horn to it's switch
Red / white: rectifier output (Voltage sampling wire in 5-wire rec...)
black / white: CDI to lock switch (IGN OFF) ***often means grounded/- ***
blue / white: Trigger signal (Blue / yellow...)
Orange / White: left indicator inside gauge
Blue / white: right indicator inside gauge
Yellow / white: fuel level gauge to
float s/w
Black / red: From exciter coil to CDI ***AC-cdi's power source***
Light green / red: neutral s/w to it's light bulb
black / yellow: CDI (output) to ign coil
Green / yellow: brake s/w to brake lights
Yellow / red: For solenoid's +