As I mentioned earlier, the OEM license plate bracket did not have holes that would line up with my license plate. I see where someone drilled two extra holes but even so, no joy. I made my own bracket:
![](https://photos.smugmug.com/Motorcycles/TT250-white/i-xB9JFB2/0/M/IMG_0065-M.jpg)
with 6mm bolts coming from inside the fender into threaded holes in 1/2" aluminum plate. Then I drilled and tapped holes to match my plate and done. Of course I had to gild the lilly a bit in order to reduce the weight.
Peter Y.