|
Hi there I live in Wolverhampton ,the first things you need to do are remove headlamp take back off and disconnect lighting connector, remove rear seat and plastic cover under it then disconnect plugs to rear light.switch on lights sides first then dip and main,note if fuse blows.if it blows that tells you that the loom is touching frame some where.have think about any work you may have done reasantly and check fittment of parts.on other hand if fuse does not blow check wiring and bulbs to lamps.also remember wiring runs to left handle bar dip switch and lighting for gauges..if you cannot sort let me know and I'll give a hand.joem.
|