ChinaRiders Forums - View Single Post

stewbrash · 04-27-2017, 02:53 PM

Hi all, not to get your thread sideways, but I just bought this bitchin welder from Sears, although you can get it from Home Depot, Amazon, EBAY etc... i paid only $282 including shipping! It doesn't come with the Argon regulator, but I bought one on EBAY FOR $11. It is a Drisco 150. At 240 volts it welds at 150 amps and at 120 volts it welds at 120 amps.
It will do ARC, MIG and Flux welding! It is 240/120 volt capable and it sure works well. The wire feed works well and can weld .25, .30 and .35 flux or MIG wire. Here are some photos: Name: 20170427_121312.jpg
Views: 1575
Size: 92.4 KB

Name: 20170427_121312.jpg
Views: 1575
Size: 92.4 KB

Name: 20170427_121355.jpg
Views: 1601
Size: 88.0 KB

Name: 20170427_121446.jpg
Views: 1564
Size: 90.3 KB

Name: 20170427_121601.jpg
Views: 1572
Size: 90.5 KB

Name: 20170427_121821.jpg
Views: 1571
Size: 93.5 KB

I have used a big_old Lincoln before, But I am just learning the MIG and Flux stuff.

04-27-2017, 02:53 PM	#15
stewbrash Join Date: Oct 2016 Posts: 405	A real chinese welder! Hi all, not to get your thread sideways, but I just bought this bitchin welder from Sears, although you can get it from Home Depot, Amazon, EBAY etc... i paid only $282 including shipping! It doesn't come with the Argon regulator, but I bought one on EBAY FOR $11. It is a Drisco 150. At 240 volts it welds at 150 amps and at 120 volts it welds at 120 amps. It will do ARC, MIG and Flux welding! It is 240/120 volt capable and it sure works well. The wire feed works well and can weld .25, .30 and .35 flux or MIG wire. Here are some photos: I have used a big_old Lincoln before, But I am just learning the MIG and Flux stuff.
	0