Let me be straight forward with this. These are knock off parts, or at least unlicensed parts sold through the same manufacturer in China.
Both Items were purchased through Aliexpress for a whopping total of a hair under $42.
Bars:
https://www.aliexpress.com/item/Blac...311.0.0.8kTPGL
Riser Adapters:
https://www.aliexpress.com/item/Pro-...311.0.0.8kTPGL
The bars are made from Alloy just like actal Renthals sold for $70+, and very heavy duty in terms of thickness, while being fairly light weight. The surface finish is actually very nice and durable. While putting on the controls I had a few moments that generally would have taken the finish off of a cheaper bar. These didn't even scuff. They have a bit less rise than the stock bars, and even with the adapters raising them up about half an inch, they still sit a little lower than the stock bars. They do, however, transmit vibration a lot more, so bar end weights or some other solution would be advised, though not necessary.
The riser adapters are also an alloy construction and also have a very durable finish to them. They fit my Hawk and the new bars perfectly.
These parts far exceeded my expectations in quality, and I would definitely recommend them if you are looking to do a similar upgrade, but don't want to spend 3 times the price.