ChinaRiders Forums - View Single Post

tortoise · 10-16-2017, 12:14 PM

Try removing the key switch pin from the CDI connector. Normally only key-off grounds the CDI, but there may be a ground fault in this circuit between the switch and CDI. If the engine does start, kill it by separating the pick-up connector.

10-16-2017, 12:14 PM	#2
tortoise Join Date: Jan 2008 Posts: 221	Try removing the key switch pin from the CDI connector. Normally only key-off grounds the CDI, but there may be a ground fault in this circuit between the switch and CDI. If the engine does start, kill it by separating the pick-up connector. Last edited by tortoise; 10-16-2017 at 04:28 PM.
	1