ChinaRiders Forums - View Single Post

Hellkitty · 12-19-2017, 10:15 PM

I decided that before I even add gas and start this thing I'm gonna take the plastic off, go through and check everything and do a carb mod, possible air box delete, replace all fuel/ vapor hoses and what ever I think needs to be replaced or modded. I figured I'm going to do it anyway, why not just do it now before i run gas through it. I also want to replace all the screws and bolts with some quality stainless hardware. i was searching for bolts and I found that there are packaged kits for Japanese sport bikes. Do you guys think buying a kit like this would contain most of what I would need and be a good investment?

https://www.ebay.com/itm/Bolt-MC-Har...75.c100623.m-1

I think these are actually zinc plated not stainless

12-19-2017, 10:15 PM	#9
Hellkitty Join Date: Dec 2017 Posts: 216	I decided that before I even add gas and start this thing I'm gonna take the plastic off, go through and check everything and do a carb mod, possible air box delete, replace all fuel/ vapor hoses and what ever I think needs to be replaced or modded. I figured I'm going to do it anyway, why not just do it now before i run gas through it. I also want to replace all the screws and bolts with some quality stainless hardware. i was searching for bolts and I found that there are packaged kits for Japanese sport bikes. Do you guys think buying a kit like this would contain most of what I would need and be a good investment? https://www.ebay.com/itm/Bolt-MC-Har...75.c100623.m-1 I think these are actually zinc plated not stainless Last edited by Hellkitty; 12-19-2017 at 10:48 PM.
	0