Quote:
Originally Posted by Scarestone
What is this for? I’m tryin to figure out how to change tranny oil? I’m new to bikes so be detailed if you can. Thank you
Apollo 250
|
Those 2 plugs are to access the timing maks and flywheel nut.
You will need to know that when you do any valve adjustments or timing.
To change the oil. Remove the skid plate. There is a large hex head plug facing toward the shifter. Unscrew it. Oil will start coming out! watch carfully as you remove it. There is a large spring and a metal screen behind the plug. Take the screen and clean it. Do not use anything that will harm the rubber seal. Repalce screen, spring, and plug. Refill will freash motorcycle wet clutch oil. About a quart. Replace skid plate. You can look on youtube also. There is an ok video on how to do it.
(Put oil in where the dip stick is. Right beside the kick start lever.)