ChinaRiders Forums - View Single Post - TaoTao ATA-250D Mods & Q&A

Darth Racer · 06-12-2018, 06:42 PM

This is the setup I used on my Rhino...

30 pilot
115 main
4th notch down on needle, 2 notches up from bottom. 1 3/4 turns out on the mixture screw.

Mikuni Clone
https://www.amazon.com/gp/product/B0176TA1H4

Pilot Jet
http://jetsrus.com/a_jets_by_carbure...-486_pilot.htm

Main Jet
http://jetsrus.com/a_jets_by_carbure...arge_round.htm

Don't mix and match OEM and Equivalent jets if you get a size up and down from those numbers for tweaking. There is a variance some times and it will be a little off. Stick with the Mikuni OEM ones is my advice.

06-12-2018, 06:42 PM	#91
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	This is the setup I used on my Rhino... 30 pilot 115 main 4th notch down on needle, 2 notches up from bottom. 1 3/4 turns out on the mixture screw. Mikuni Clone https://www.amazon.com/gp/product/B0176TA1H4 Pilot Jet http://jetsrus.com/a_jets_by_carbure...-486_pilot.htm Main Jet http://jetsrus.com/a_jets_by_carbure...arge_round.htm Don't mix and match OEM and Equivalent jets if you get a size up and down from those numbers for tweaking. There is a variance some times and it will be a little off. Stick with the Mikuni OEM ones is my advice.
	0