Greetings from New York!
Wanted to say hey & do a mods/upgrades/parts list for my 2017 "DUCOPY" SSR Razkull 125.
Advice for anyone with a Razkull or a Venom / Ice Bear clone copy:
TOSS the stock carburetor ASAP. Go over all engine bolts w/ Loctite or stronger replacements first, then immediately swap the carb. My stock PZ19 carb literally blew off at the bowl while cruising on the highway @ 50mph.
Bought it barely used w/ about 17 mi. and put on about 1300 mi. + in the past 4 months. The monster is running a little rich as I'm still tuning but, overall it's been a blast & quite reliable for such an inexpensive street bike. It gets so much more attention than any Grom on the street.
- Mikuni VM22 Upgrade Kit
(Chinese clone - the carb, intake manifold & gaskets were all pretty good quality and have been strong for over a month now!)
http://a.co/d/27cTF4o
- # 125 Main Jet
(these were the only jets that fit this carby, various sizes in kit)
http://a.co/d/h6Bojpi
- # 40 Pilot Jet
(this particular carby took the Keihin 3J pilots - stock carb came w/ a poorly drilled #38 Keihin 3j slow jet, I might swap back to a #38 but a higher quality one from jetsRus)
https://jetsrus.com/a_jets_by_carbur...n_3J_slow.html
- 38mm K&N style Air Filter + inline fuel filters
http://a.co/d/5RaT0ax
- Red 135 degree silicone elbow
(connects air filter to carby without pushing on plastics)
https://www.pegasusautoracing.com/pr...sp?RecID=11551
- Clear fuel line replacement
http://a.co/d/7g48ifu
- NGK CR6E plugs
(6965)
http://a.co/d/6bibMcm
- UNI crankcase breather filter
http://a.co/d/iOFaAC1
- SC Project - Grom Full Exhaust
(Super loud & throaty, installed fairly easy. Decent quality for the price, carbon wrap started to pull up a little after a month. Performance was still great, but it's just a little too loud IMHO. Muffler didn't come with a dB killer... prob buying a quieter muffler in the near future.)
https://ebay.us/wlCVIP
- Jrl Exhaust crush gasket for header pipe to engine exhaust outlet
(fits perfect)
http://a.co/d/1lvbgWx
- 16T Front sprocket
(+1 in the front, def added 3-5mph on my top end without sacrificing acceleration. First gear is a slight bit longer & more usable now)
http://a.co/d/iL7Qou0
- 34T Rear sprocket
(stock gear size, just better quality upgrade)
https://www.whygostock.com/ssr-razku...rear-sprocket/
- RK Racing 428 heavy-duty Gold Chain
(110 links but only needed 108 w/ this particular gearing, looks amazing)
http://a.co/d/bW698fF
- Michelin City Grip tires
(120/70-12 , very grippy - now the bike sticks to pavement like crazy & no more sliding around in wet weather...highly recommend these tires!)
http://a.co/d/gu6eFF1
- MZS Shorty Brake & Clutch Levers
(for a Grommy but were a perfect fit. Great build quality. Definitely smoother shifts & much easier to find neutral over the stock levers)
http://a.co/d/dqr2pu9
- MZS Bar End Mirrors
(Poor build quality, eventually both flew off of bike randomly, mounts weren't strong nor fit well)
http://a.co/d/c4JmWh5
- Kawell Universal Bar End Mirrors
(Much better quality than MZS's, but not as cool, they def have a better sight range as well)
http://a.co/d/9T6SrAl
- Cougar Motor H11 LED Fog Light Bulbs
(slightly better hi/lo beams vs. stock)
http://a.co/d/iTdhb7B
- Beamtech H11 LED Head Light Bulbs
(Much brighter than Cougar's & significantly better than stock. Couldn't fit into the hi beam and mount the headlight assembly back on. Running 2 Cougar bulbs for now.)
http://a.co/d/eYV99ku
- Vagabond Motorsports Fender Eliminator kit
(for the 17+ SSR Razkull... it's a little pricey, but worth every penny...super easy & clean install)
http://a.co/d/0Hddd6d
- USB Charger
http://a.co/d/iHnF1s4
- Roam cell phone mount
(so far so good!)
http://a.co/d/0UmaOti
- uxCell water-proof Horn upgrade
(much louder than stock, simple swap... but, the sc project exhaust is still the loudest thing on the bike hehe)
http://a.co/d/2aQbCAF
- Stop-Alert FastFlash LED Brake Light strobe
(def makes you more noticeable when braking)
http://a.co/d/9sQjLdm
Some pics to follow!