View Single Post
Old 01-06-2019, 10:56 AM   #11
Megadan   Megadan is offline
 
Megadan's Avatar
 
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,029
Quote:
Originally Posted by Bud1968 View Post
I have a dumb question probably guys but I'm wondering what fastens the solenoid in place? I changed the battery and it seems to be just kinda hanging there. I see some tabs I'm assuming they hold it in place, but can't really get it to snap in. Thanks, sorry if it's somewhere on here but I couldn't find it.
The relay should have a rubber mount with 2 slotted holes that "should" mount to the pair of tabs sticking out of the airbox nearby. You are correct in your thinking. They really don't like staying in place though. The best luck I had was to loosen the electrical connections, get it on the tabs (A little lubrication helps if it is stubborn) and then tighten the connections back down. I also had to use a little heat gun persuasion on the positive cable to get the insulation to conform in a way that wouldn't pull it back off again.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331
2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1
2024 Royal Enfield Shotgun 650
https://chinariders.net/showthread.php?t=34124


 
Reply With Quote