ChinaRiders Forums - View Single Post

Sport Rider · 02-03-2019, 05:12 PM

today was a day of ups and downs working on an old bike.

got the clutch slave cylinder installed. I had to pump brake fluid through it to get all the crud out of the line. in the end, working good. +1

got the front brakes bled. they were not in such bad shape because they came off the other bike when I switched back to stock. +1

then came the rear brake. couldn't get jack squat to flow through the master cylinder. going to have to find another used one. -1

had to remove the engine cover on the right side because the form-a-gasket was leaking. drained oil, removed, cleaned up, put back together. +1 for job done, -1 because I had to re-do it.

will get the rear brake fixed up and then will have to wait for the new 4-1 headers.

I guess that makes me +1 overall for the day.

02-03-2019, 05:12 PM	#44
Sport Rider Join Date: Jan 2016 Location: Mooresville NC Posts: 2,045	today was a day of ups and downs working on an old bike. got the clutch slave cylinder installed. I had to pump brake fluid through it to get all the crud out of the line. in the end, working good. +1 got the front brakes bled. they were not in such bad shape because they came off the other bike when I switched back to stock. +1 then came the rear brake. couldn't get jack squat to flow through the master cylinder. going to have to find another used one. -1 had to remove the engine cover on the right side because the form-a-gasket was leaking. drained oil, removed, cleaned up, put back together. +1 for job done, -1 because I had to re-do it. will get the rear brake fixed up and then will have to wait for the new 4-1 headers. I guess that makes me +1 overall for the day.
	2