ChinaRiders Forums - View Single Post - Dc powered cdi question!! Help would be appreciated

humanbeing · 02-07-2019, 03:19 PM

That vehicle = An orphan from Taiwan. Thx to the similarities btw GY6 copies, we can find some parts in reasonable price.
Typical chinese dc-CDI works btw 8-16V & outputs around 200V
Don't u measured coil's primary / secondary ohm reading? Spark plug still in OK condition? ... https://get2itparts.com/etontech/PD_CXL150.php
AC reading (although seems OK this time) is useless. Build a Peak Voltage Adapter https://forum.jorsindo.com/forum.php...authorid=86716
GY6 should be something similar to: (don't need to measure Exciter coil when using DC-cdi)

02-07-2019, 03:19 PM	#2
humanbeing Join Date: Mar 2008 Posts: 2,436	That vehicle = An orphan from Taiwan. Thx to the similarities btw GY6 copies, we can find some parts in reasonable price. Typical chinese dc-CDI works btw 8-16V & outputs around 200V Don't u measured coil's primary / secondary ohm reading? Spark plug still in OK condition? ... https://get2itparts.com/etontech/PD_CXL150.php AC reading (although seems OK this time) is useless. Build a Peak Voltage Adapter https://forum.jorsindo.com/forum.php...authorid=86716 GY6 should be something similar to: (don't need to measure Exciter coil when using DC-cdi) __________________ Last edited by humanbeing; 02-07-2019 at 03:54 PM.
	1