|
If the chain is too tight, loosen the axle nut, then loosen BOTH sides of the chain tensioners. Then hit the tire forward with your hand or use a rubber mallet, to get about the corrwect tension you want.Then , tighten the chain tensioners back down, each side a little, then other side, etc while keeping the middle of the tire sighted straight ,you dont want to tighten one side more than the other and cause the tire to be cocked to one side or the other.If you notice your brake caliper dragging, it's off to one side too much. Once you get the tension right, and the tire is aligned straight, tighten the locknuts on the tensioners, and then tighten your axle nut down .
__________________
2001 Mustang GT
2004 Sportster
2018 VADER
2020 Orion RXB250L
|