[FLASHLIGHTBOY]

put it on everything... EXCEPT your chain adjustors.. thos e you will need to loosen them to adjust your chain.... make sure the bolts are EXTRA TIGHT... and the adjustors nuts you can double nut them... as long as the bolts for the rear axle flanges are EXTRA TIGHT.... then they should not come loose... another good trick is to put a dab of silicone on the body bolts where the nuts go on... an d the left side inspection chrome plug... and your brake light sending unit on th e right foot linkage.... since it is plastic nut... you can not tighten it too much.... silicone good in this case so it does not rattle loose...