Quote:
Originally Posted by JerryHawk250
|
I thought about getting that one so you would have all bases covered on pulling something but it will have to be angled up somehow unless you like it angled down.You might could tack weld a shim on it somehow.I thought about buying the hitch from partskit and using it backwards & upside down,you would have to drill out the smaller hole to 3/4" if there's room and use it backwards and upside down to maybe level it out.Since your applying the opposite angle,doing it that way should bring it up level.Your 2 big long bolts would be at the end of the threads,they might be long enough.
https://partskit.com/product/110316