View Single Post
Old 02-01-2020, 11:11 PM   #9
david3921   david3921 is offline
 
Join Date: Feb 2009
Location: Michigan
Posts: 1,031
What Darth mentions has happened to most of us that switched carbs on these atvs. The top of the carb where the cable goes in is smaller than the original carb. This causes the cable to not seat down far enough pulling the slide up. Some have taken the cable end off to seat the end into the cap, others (myself) have used the original carb top cap that threads on. Also, as Darth mentions, the slide can be put in backwards. Take off the air cleaner and check in the throat. The slide should be all the way down or very close to it with no throttling.
__________________
2012 Kawasaki Versys
1984 Honda Magna V65
2016 Rhino 250
2016 Tao Tao 125D


 
Reply With Quote