|
The bike is here! Finally assembled too. I ordered the mikuni carb with a 110 jet pre installed from an eBay seller, and at first, there was a piece of metal like a clip holding the throttle body wide open. Idled VERY high for the first run and pipe glowed it was so hot. Then, fixed the clip holding open the throttle body, and realized the only way to change the idle with that specific carb was with the throttle cable. Still idiling too high, removed the nut on the cable which allowed it to slide further back for a perfect idle now. Still has to be on half choke, hoping that resolves itself. Need to loosen chain as well, having an issue with neutral and 1st, but I understand it’s new and needs to break in. Super excited with the bike. Couldn’t be more thrilled. You guys rock!
|