|
Math Teacher, the RX4 valve check is much easier than on the RX3. In particular, it was a super PITA to get to the exhaust valves on my RX3 due to the frame support and how the radiators were placed. Yes, you need to remove all the body plastic. That's a 5 minute job once you have the sequence down. Then you must remove a cast aluminum support so you can pull the valve cover out the left side. No more worries about installing the valve covers upside down (BTDT). Access is just so much better!
You must be the RX4 high mileage champ. It sounds like you and the bike have bonded. Congratulations.
Peter Y.
|