09-08-2020, 12:04 AM
|
#12
|
Join Date: Sep 2020
Posts: 1
|
Quote:
Originally Posted by SpudRider
Here are some additional photographs I took while the engine was apart.
Here is a closeup photograph of the valve recession.
CSC sent me a new cylinder head and new exhaust valves under warranty coverage.
Using my valve spring, compression tool, I installed four new valves in the new cylinder head. I lapped all four valves, and also installed four, new, valve stem seals.
After reassembling the engine, I re-installed the engine in the frame, and reassembled the motorcycle. As I posted earlier, the bike has now been running very well for over 3,000 miles, and all four valves are holding the correct clearance.
|
Hello! I'm new to the forum. I was just wondering where you ordered your valve seals? Thank you!
|
|
|