|
I just read the part where there's 2 two wires you're looking for in the back. Ours has one 3 wire and a 2 wire in the back.
One set is the brake light, it's a 3 wire, 1 green/yellow stripe,1 wire green for ground, and a brown for the tail light.
The other is a dead man tether is connected to the kill switch which has the 2 wire coloring of 1 wire black/white stripe and 1 wire green. At the front switch connection it goes from black/white stripe to yellow.
I can add the picture of what he always has to re-pin when getting a new harness to my photo list. It's a green/yellow at the front, which is for the brake system, my husband thinks its maybe for a blinker (to interrupt the system?), anyway, it won't just plug and play, you have to take the green/yellow strip out and swap it for a red wire in another green/yellow connection, so that you have two green/yellow striped wires together in a connection and red and black wires going into a connection turning into brown and blue respctfully.
If you take pictures my husband can help better.
|