Quote:
Originally Posted by daytonacat
almost forgot;
the bolt closest to the spark plug on the plate ALSO holds the circular plate on the other side of the head inplace.
There is a LOCATING tab on that plate to keep it in place when you tighten down that one long bolt.
Torque all 3 bolts to 7 to 8 Ft Lbs. use a drop of blue lock tight on each one.
ALSO see this link to see my oil cooler instllation on my STOCK Vader.
https://www.chinariders.net/showthread.php?t=25925 |
That is fine installation! Thanks much!