ChinaRiders Forums - View Single Post

OneLeggedRider · 10-14-2020, 10:14 PM

Well besides the blue 1000rpm clutch springs, I ordered 13gram Dr Pulley slider wedges. Alot of guys on GY6 Performance have my exact same NCY CVT setup and for my weight recommended them to get to 60mph+.

I spent a few hours on the bike this afternoon and I gotta say even though I don't care for the 4000rpm stall speed and lower ratio, I don't hate it. It reminds me of my old Malibu SS. When it does launch it's with a quickness (not common for a 150cc scooter) and accelerating on steep hills is an entirely new experience on this bike. But wound for sound I could only achieve 53mph whereas the stock setup would hit 59mph on the same straight stretch.

10-14-2020, 10:14 PM	#9
OneLeggedRider Join Date: Nov 2018 Location: Stockport, Oh. Posts: 1,442	Well besides the blue 1000rpm clutch springs, I ordered 13gram Dr Pulley slider wedges. Alot of guys on GY6 Performance have my exact same NCY CVT setup and for my weight recommended them to get to 60mph+. I spent a few hours on the bike this afternoon and I gotta say even though I don't care for the 4000rpm stall speed and lower ratio, I don't hate it. It reminds me of my old Malibu SS. When it does launch it's with a quickness (not common for a 150cc scooter) and accelerating on steep hills is an entirely new experience on this bike. But wound for sound I could only achieve 53mph whereas the stock setup would hit 59mph on the same straight stretch. __________________ ~ Don't poke the bear ~ M.M.I. Dean's List graduate class of '95 and Specialty welder 2020 Ice Bear Terifecta 150cc Trike 2011 Honda Foreman 500ES 4x4 2001 Polaris Scrambler 400
	2