ChinaRiders Forums - View Single Post

JOAMON · 03-11-2021, 09:51 PM

Just throwing this out there for anyone who has wanted to repurpose the "useless" (imo) hazard light switch on the Brozz. I'm going to be adding a kill switch later, but for now, here is how I wired my hazard switch to become an on/off switch for my fog lights (should anyone else want to do the same). I've also shared this with MotoCheez, so he can share it with his network (if he wants) too.

Fog Lights (how I have them mounted):

Fog Lights On (via the old hazard light switch ~ above the starter button):

Wiring Diagram (just ask if you have any questions):
https://drive.google.com/file/d/1kDb...ew?usp=sharing

03-11-2021, 09:51 PM	#1
JOAMON Join Date: Feb 2021 Location: Central GA (USA) Posts: 22	Brozz 250 Hazard Light Rewire Just throwing this out there for anyone who has wanted to repurpose the "useless" (imo) hazard light switch on the Brozz. I'm going to be adding a kill switch later, but for now, here is how I wired my hazard switch to become an on/off switch for my fog lights (should anyone else want to do the same). I've also shared this with MotoCheez, so he can share it with his network (if he wants) too. Fog Lights (how I have them mounted): Fog Lights On (via the old hazard light switch ~ above the starter button): Wiring Diagram (just ask if you have any questions): https://drive.google.com/file/d/1kDb...ew?usp=sharing __________________ The Now: 2020 Bashan Brozz 250 ~ Click for Mod List The Former: CB500X (2014), Versys 650 (2010), Vulcan 750 (2002), DR350SE (1996), YZ250 (1988)
	2