ChinaRiders Forums - View Single Post

Aecker · 03-16-2021, 11:05 AM

Hello I removed the front fender due to noise from vibration, the fender is very thin and I’m going to cut/mod to make it stronger and smaller, meanwhile this is the bracket I made, the rod and steel plate are from Home Depot, I think the bracket is just mild steel stock and the rod is a hanger of sort. After cutting and drilling the mounting holes next is welding it together. After just paint. This is just a idea you can come up with your own. You need this to keep the cables from rubbing on the front tire.
Fork tube gaiters or boots 8x25mm eBay.

03-16-2021, 11:05 AM	#2
Aecker Join Date: Mar 2021 Location: Arkansas Posts: 11	Fender less bracket Hello I removed the front fender due to noise from vibration, the fender is very thin and I’m going to cut/mod to make it stronger and smaller, meanwhile this is the bracket I made, the rod and steel plate are from Home Depot, I think the bracket is just mild steel stock and the rod is a hanger of sort. After cutting and drilling the mounting holes next is welding it together. After just paint. This is just a idea you can come up with your own. You need this to keep the cables from rubbing on the front tire. Fork tube gaiters or boots 8x25mm eBay. Attached Images Last edited by Aecker; 03-17-2021 at 04:30 PM.
	1