ChinaRiders Forums - View Single Post - Don't berate me.. just valve question I can't figure out

herbie · 06-17-2021, 10:01 AM

The best method for me for valve lash adjustments is the go-no go method. Say you are setting the intake at .002 (thousands) then you would use a .002 and .003 feeler gauge. Adjust to your .002 until you feel a little drag on the feeler gauge and if you can't slide the .003 in the gap then you have a perfect adjustment.

06-17-2021, 10:01 AM	#9
herbie Join Date: May 2019 Location: Illinois Posts: 864	The best method for me for valve lash adjustments is the go-no go method. Say you are setting the intake at .002 (thousands) then you would use a .002 and .003 feeler gauge. Adjust to your .002 until you feel a little drag on the feeler gauge and if you can't slide the .003 in the gap then you have a perfect adjustment. __________________ 2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 Last edited by herbie; 06-17-2021 at 11:10 AM.
	3