|
the apollo250rx are clones of a honda crf230f basically. every honda part for that engine has fit perfectly and ran very well.
if you need chassis/frame parts orion/apollo motor sports has a pretty decent selection and amazon is great for almost everything else.
The apollo is great just modify it as you get more into it as it can use alot of upgrades to get to a MX standard like all these chinese bikes, best part is there is full on honda parts your bike has access to with very limited modification if any required. Very good bike... use lock tight and make sure you get a new carb asap (vm26 mikuni is the going favorite for non engine modified 250rx apollos and zong engines) and a jet kit ( 27.5 pilot and 115 main from the suggestions based off users Douglass).
hope your having fun
__________________
2013 Apollo 250RX
-Zong db36 233cc engine w/ titanium valves, ported exh.
-WizeCo 11:1 piston
-CRF230 Athena big bore cylinder
-Powercore 788 Exhaust
-HF K&N Pod Filter and intake
-1/4 fuel lines and valves w/ plastic tank
-HR handle bars and MX pully controls
-CRF230 SHOWA fork
-Oversized MX brakes & rotors
-17T 46T (3.07 Gear ratio) JT Sprockets with a D.I.D gold MX chain
-Keihin pwk30 30mm carburetor 115main/35pilot
|