Quote:
Originally Posted by FLASHLIGHTBOY
hello... to find spark... do this... unplug the ignition switch... then jump the solenoid... to crank motor... if you have no spark then.... '
step # 2.. use a test light.. attach it to the POSITIVE POST... and test the BLACK and yellow wire( or white tracer)... at the cdi... the bottom row of 3 wires.. in th e middle... if it lights up... then a kill switch or device is grounding the spark..
step # 3.... remove t he connector plug.. from the connector... using a cotter pin... push the connecting wire out.... re-install connector to cdi
step # 4... crank motor over... you should have spark... if no spark...
step # 5.. check youtube on how to test igniton coil.... where the spark plug wire goes to.. ..
THESE ARE THE USUAL PROBLEMS.. write down your results so you will be able to follow stuff...... people get confused on what they did... usually some thing small over looked
|
Re: Step3. When you refer to the "connector plug" and the "connecting wire" are you referring to the plug to the CDI and the connecting wire being the black/white wire from the kill switch?