Quote:
Originally Posted by OrangeTitan
I am familiar with the part you are referring to. It sits on a bearing. That part isn’t missing. Either the arm isn’t connecting with it (I don’t think that’s it) or for some reason that part isn’t depressing (my rolling theory). Is it possible to depress that with your hand to check if it actually depresses or is it to strong to do with your hand?
|
No, not possible with your hand. You should be able to move the clutch arm with a pair a channel lock pliers. Maybe the clutch arm isn't properly mounted on the splined shaft? There should be a point where contact is made when splined shaft is rotated to engage the clutch moving in the direction of cable mount, then mount the clutch arm where the cable starts to engage the clutch upon pulling the lever. I'm hoping you should be able to adjust free play and full clutch dis-engagement then. Good luck.