ChinaRiders Forums - View Single Post - Stuck at full throttle after carb adjustment??

zero_dgz · 03-14-2023, 11:43 AM

I'll echo that Dan's assessment is probably correct. Take the slide back out and make sure it's installed correctly.

I once fixed a similar issue on a CRF125 that someone brought to me, having discovered that the owner managed to install the slide backwards. This is apparently possible if it is inserted with sufficient gusto, and has the side effect of propping the throttle permanently open because the slide will rest on the tip of the idle adjustment screw and never be able to close beyond that point.

03-14-2023, 11:43 AM	#4
zero_dgz Join Date: Jan 2020 Posts: 255	I'll echo that Dan's assessment is probably correct. Take the slide back out and make sure it's installed correctly. I once fixed a similar issue on a CRF125 that someone brought to me, having discovered that the owner managed to install the slide backwards. This is apparently possible if it is inserted with sufficient gusto, and has the side effect of propping the throttle permanently open because the slide will rest on the tip of the idle adjustment screw and never be able to close beyond that point.
	1