|
I'd rather not spend $30 on spokes, so I've decided to fabricate some. I know that the spokes are 4mm diameter, and around 6 inches long, so I've bought some solid steel rods that are 4mm in diameter. They arrive on 7/11/2023 and I'm going to use a die to put the right threads on the end, then I'll forge them into spokes with the head and bend. I'll let you all know how it goes. All else failing, I'll just bend the metal into hooks and hook it though the hubs, but I am going to try to fabricate spokes that are as close to original as possible.
|