Quote:
Originally Posted by dirtbkr188
Unfortunately, since you can't access the float or float needle, pilot jet, main jet, or even the air/fuel mixture screw, my suggestion would be to get a comparable carb that you can actually fine-tune and dial in, like THIS ONE. It uses Mikuni Jets and has a removable float bowl and access to the air/fuel screw. If you just want the carb alone, you can find that right HERE
|
Well I drilled out the bolts to the bowl and I think you all are right and jets are clogged. Before I go messing things up I want to make sure the 2 items I have circled (Jets) should they not have a hole that goes all the way through to the side I have circled? There was buildup on the end and I tried to clean it off but I am still not sure if there should not be a hole there? I feel like there should as I am not sure how else it would get gas back up into the port. Let me know your thoughts and thank you all as you have been very helpful.