I'm trying to find a good guide on tuning the new carb. I bought this PZ27
https://www.amazon.com/dp/B07F9XX7TN...roduct_details
and it works 100% better than the one that was on there since that didn't work at all.
I'm having trouble getting the fuel and air mix right. I've searched around and haven't found a step by step guide on how to adjust these screws. I read about being too rich or too lean and I'm not sure what i'm listening for.
I'm just trying to get things to a middle ground. As far as I can determine from reading and watching videos, if you get to a decent spot adjusting the air screw can get things dialed in.
The problem I'm running into is that the fuel mix adjustment screw is on the bottom of the carb which is nearly inaccessible. I'm able to get in there with a tiny screwdriver, but not if the engine has been running as the exhaust is there to melt my skin off. Is there a better way to get to that screw that I'm missing?