ChinaRiders Forums - View Single Post - Modifications made to my new Viva VX200SX!

morespl · 03-26-2007, 10:15 PM

Hi Sam,

You really need to be patient and take your time assembling this bike.
Before it arrives, go get yourself a 6mm 45-degreee grease fitting, two tubes of red Locktight, one qt of 10-40w synthetic oil (I used Mobile 1 motor cycle) and some JB weld. The wiring harness on this bike is horrid and many problems will occur if you donâ€™t carefully check each connection under the instrument cluster. Use pliers to tighten the bullet connectors on the main wiring harness as they will just slip out and are very loose connections from the factory.

Regards,
Ray

03-26-2007, 10:15 PM	#32
morespl Join Date: Mar 2007 Location: SoCal Posts: 24	Hi Sam, You really need to be patient and take your time assembling this bike. Before it arrives, go get yourself a 6mm 45-degreee grease fitting, two tubes of red Locktight, one qt of 10-40w synthetic oil (I used Mobile 1 motor cycle) and some JB weld. The wiring harness on this bike is horrid and many problems will occur if you donâ€™t carefully check each connection under the instrument cluster. Use pliers to tighten the bullet connectors on the main wiring harness as they will just slip out and are very loose connections from the factory. Regards, Ray __________________ RLA Home Theater The Inland Empire THX certified A/V installation company<br /><br />2006 Viva VX200SX (blue) with neon clown blue rims LOL.. Hey at least they aren't pink!<br />
	0