ChinaRiders Forums - View Single Post

Oengus · 04-21-2010, 09:42 AM

Model.........................................LC16 6FMM
Type.............................................. ....
single cylinder, 4-stroke, vertical, air-cooled.
BoreÃ—Stroke......................65.5mmÃ—66 .2mm
Displacement.....................................2 30ml
Compression ratio.............................9.0ï¼š1
Starting....................electric/kick
Ignition.......................................CDI
Intake.................overhead camshaft
Lubrication..........pressure and splash
Gearshift...........................cyclic
Clutch..........................................
manual, wet, multi-plate
Max. power and corresponding rpm......................12kW/7500r/min (16.32hp)
Max. torque and corresponding rpm.....................17N.m/6000r/min
Min. fuel consumption............â‰¤354g/kW.h
Min. no-load steady speed (idle speed)............1500Â±150r/min

http://loncinengine.com/www/index/

The engine for sale in china as a CBD250 or LC166FMM for 1900 CNY = 278.25 USD
http://detail.china.alibaba.com/buye...312441480.html

The Chinese cannot get their specification correctâ€¦.but the engine for that bike sells in china for under $300.00.

An Orion bike, dirt version in china sells for 8200 CYN = 1200.84 USD
http://www.chinaorion.com/AGB30E95.html

They like to call 223cc 249cc? Then go ahead and give you the bore and stroke of the engine and that telsl you it is not 249cc? 65.66 X 66.2 is 223cc and if you see that and its a 166FMM engine and a HONDA engine design.

04-21-2010, 09:42 AM	#45
Oengus Join Date: Oct 2009 Posts: 826	Model.........................................LC16 6FMM Type.............................................. .... single cylinder, 4-stroke, vertical, air-cooled. BoreÃ—Stroke......................65.5mmÃ—66 .2mm Displacement.....................................2 30ml Compression ratio.............................9.0ï¼š1 Starting....................electric/kick Ignition.......................................CDI Intake.................overhead camshaft Lubrication..........pressure and splash Gearshift...........................cyclic Clutch.......................................... manual, wet, multi-plate Max. power and corresponding rpm......................12kW/7500r/min (16.32hp) Max. torque and corresponding rpm.....................17N.m/6000r/min Min. fuel consumption............â‰¤354g/kW.h Min. no-load steady speed (idle speed)............1500Â±150r/min http://loncinengine.com/www/index/ The engine for sale in china as a CBD250 or LC166FMM for 1900 CNY = 278.25 USD http://detail.china.alibaba.com/buye...312441480.html The Chinese cannot get their specification correctâ€¦.but the engine for that bike sells in china for under $300.00. An Orion bike, dirt version in china sells for 8200 CYN = 1200.84 USD http://www.chinaorion.com/AGB30E95.html They like to call 223cc 249cc? Then go ahead and give you the bore and stroke of the engine and that telsl you it is not 249cc? 65.66 X 66.2 is 223cc and if you see that and its a 166FMM engine and a HONDA engine design.
	0