ChinaRiders Forums - View Single Post - What is better than a CT110/ Postie Bike?

XLsior · 10-21-2023, 04:47 AM

With the main bike out of action for awhile felt like a good time to work on the 84 lounge ornament..

Wanted to get the welding out of the way and zip up any left over patch works...

Then opted to weld the seams to prevent any further/potential moisture ingress and inner layer corrosion from happening...the main area this occurred is on the battery box access side..

So more solid now than factory.

So the plan is to de-seam and fill/sand the multi layer chassis into a sleek CT110.

then get prepared for the rattle can spray booth...

10-21-2023, 04:47 AM	#39
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,282	Unseamingly With the main bike out of action for awhile felt like a good time to work on the 84 lounge ornament.. Wanted to get the welding out of the way and zip up any left over patch works... Then opted to weld the seams to prevent any further/potential moisture ingress and inner layer corrosion from happening...the main area this occurred is on the battery box access side.. So more solid now than factory. So the plan is to de-seam and fill/sand the multi layer chassis into a sleek CT110. then get prepared for the rattle can spray booth... Attached Images
	2